{"id":1855,"date":"2026-11-18T19:15:22","date_gmt":"2026-11-18T19:15:22","guid":{"rendered":"https:\/\/opinohome.com\/blog\/?p=1855"},"modified":"2026-11-18T19:15:27","modified_gmt":"2026-11-18T19:15:27","slug":"kitchen-renovation-ideas-for-quebec-homes","status":"publish","type":"post","link":"https:\/\/opinohome.com\/blog\/kitchen-renovation-ideas-for-quebec-homes\/","title":{"rendered":"Kitchen renovation ideas for Quebec homes, from plex galleys to bungalow open plans"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Kitchen renovation ideas in Quebec depend heavily on the building you are working in. A Montreal plex and a suburban bungalow were built around very different assumptions about how families cook, where daylight comes from and where the walls sit. Before you choose a backsplash or a hood, it helps to understand the shell you are starting with. Quebec kitchens differ enough from house to house that a single style rarely fits every building, and these ideas help you choose an approach that suits the house you own. The rest of these kitchen design ideas build on that starting point, and they apply to small kitchens, open-concept layouts and everything in between.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Start from the house you actually live in<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A Montreal plex is a two- or three-storey building with one or two apartments per floor. Each apartment runs from the front of the building to the back, with a fairly direct connection to the street and no lobby or hallways in between. That layout tends to push the kitchen to the rear, where it often ends up long and narrow with a window at one end and little natural light in the middle. Many plex <a href=\"https:\/\/opinohome.com\/blog\/10-design-trends-defining-modern-german-kitchens\/\">kitchens<\/a> are small kitchens in practice, so the layout decisions matter more than the finishes.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Galley that works in a plex<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A galley kitchen is often the honest answer for a rear plex kitchen, and it can work well if the aisle is sized properly. The NKBA Kitchen Planning Guideline 6 calls for a work aisle of at least 42 inches for one cook and at least 48 inches when more than one person cooks regularly. In a narrow plex kitchen, that measurement decides more than any finish choice. Protect it first. If the aisle is tight, put tall units on one side only, keep wall cabinets shallow on the opposite wall, and put the fridge at the end of the run so it does not block traffic. These small design moves help the space feel open even when the floor plan is tight.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Opening up a bungalow<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Post-war bungalows often have a wall between the kitchen and the living room, and many owners want it gone. Taking down that wall is one of the bigger decisions in a renovation, so treat it as a project with its own steps rather than a quick demolition. In Montreal, a permit is required for work that touches any wall, load-bearing or not. If the work affects the structure, plans must be signed and sealed by an engineer. Budget time for that before you pick finishes. Once the wall is open, the sightline from the sink to the living room changes how the kitchen feels, and the whole room becomes part of one continuous space. It is worth designing the cabinet run with that view in mind, which is the core idea behind an open-concept kitchen. Opening the entire main floor also means the dining room and the living room share the same light, so plan the fixtures and the finishes for the whole room rather than the kitchen alone.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">The work triangle, used loosely<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The classic work triangle still gives a useful check on any plan. The NKBA guideline suggests that the three legs between the sink, the cooktop and the refrigerator should total no more than 26 feet, with each leg between 4 and 9 feet. No leg should cut through an island by more than 12 inches. In a plex galley, the triangle often collapses into a straight line, and that is acceptable as long as the distances stay short and the aisle is wide enough. Use the triangle as a sanity check, not as a rule you must hit exactly. A well-planned kitchen design keeps meal prep flowing between the zones without forcing extra steps.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A full-height stone-look backsplash and waterfall island, with the hood space still open during installation. Photo: Donovan Nimmo, Wikimedia Commons, CC0<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Surfaces that set the mood<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Surfaces determine how the kitchen reads in a space that gets little daylight for much of the Quebec winter. Choose them with the winter daylight in mind, and do not rely only on the showroom photo. The right palette can add warmth to a white kitchen or give a traditional kitchen a fresher style.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Backsplash: subway tile still earns its place<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Subway tile remains a dependable choice, and the kitchen collection of <a href=\"https:\/\/entrepotdelareno.com\/en\/collections\/kitchen\" target=\"_blank\" rel=\"noopener\">a Quebec flooring and bathroom retailer<\/a> lists white subway wall tiles measuring 3 \u00d7 6, 3 \u00d7 12 and 4 \u00d7 16 inches for backsplashes, along with large-format 24 \u00d7 24-inch ceramic tiles for bigger walls. The size changes the feel more than most people expect. Smaller tiles add grout lines and visual rhythm. Larger tiles read calmer and need fewer joints to clean. Finish matters too. A glossy surface reflects light, which helps a dark plex kitchen feel brighter. A matte surface reduces glare under strong task lights and hides fingerprints better. In a north-facing galley, high gloss is often the better bet. For an island in an open-plan kitchen, a matte finish may better suit a calmer style and enhance the kitchen&#8217;s overall look.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Cabinet fronts and finishes<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Shaker doors remain the safe default because they suit homes of most ages and a wide range of budgets. Slab fronts look cleaner and work well in a modern bungalow with an open plan. Two-tone schemes, with darker lower cabinets and lighter uppers, can make a tall plex kitchen feel less heavy and can visually separate the work zone from the space around it. A custom panel or a two-tone finish can create a modern style without changing the layout at all. Matte black hardware has been popular in recent renovations and pairs well with white and warm wood tones. Custom cabinetry can be sized to fit a narrow wall or an odd-sized alcove, which is useful in older Quebec homes. Choose a finish that will still look right when the winter light changes, and test samples at night as well as in the morning.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Storage that earns its space<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Good storage keeps a kitchen calm, and it is often the difference between a space that feels cramped and one that feels settled. Floating shelves can add open display and free up wall space, but they work best for items you use every day and want within reach. Open shelves carry the same logic, though they need regular dusting, especially near the range, where grease settles quickly. Small appliances you reach for daily, such as a kettle or a toaster, can stay on the counter if they are close at hand, while the less-used appliances belong behind closed doors. Wall cabinets keep dust and grease off the things you use less often. Combining open shelving and closed wall cabinets provides quick access while keeping clutter out of sight. An appliance garage, a closed cabinet with a lift-up or sliding front, keeps the toaster, the stand mixer and the coffee maker off the counter and frees up that counter space for meal prep. A tall pantry unit makes use of vertical space that is often left empty in plex kitchens. In a narrow plex kitchen, adding storage vertically can provide more capacity without taking up additional floor space. Deep drawers in the lower cabinets are easier to reach than a corner base and hold pots and bulk goods well. If you enjoy a glass of wine with dinner, a small wine rack fits neatly into an unused space beside the fridge or at the end of a run. Plan these spaces on paper before you order, so each cabinet has a clear job.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Sinks<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The sink choice affects both looks and daily use. The same collection lists 18-gauge stainless steel sinks and black granite-effect sinks, and each has trade-offs. Stainless is durable and easy to live with, but it shows water spots and scratches. Granite-effect composite sinks give a bold, uniform colour and hide wear, though they need a gentle cleaner. Undermount sinks create a clean counter edge and make wiping easy, while drop-in sinks are usually simpler to install in older countertops. Whichever you pick, confirm the cut-out and the depth before you order the counter, because a mismatch there is expensive to fix.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Air and light, the ideas people forget<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Ventilation and lighting are the parts of a kitchen renovation that most owners underestimate. Ventilation matters more in Quebec, where homes are sealed tightly against the cold and moisture from cooking stays inside. Good air movement and well-placed fixtures make even a small kitchen comfortable to work in.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Size the range hood to the range<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The Home Ventilating Institute recommends 100 CFM per linear foot of range for a hood mounted against a wall, with a minimum of 40 CFM. Over an island, the recommendation rises to 150 CFM per foot, with a minimum of 50 CFM. A 30-inch wall hood should deliver about 250 CFM, a 36-inch hood about 300 CFM, and a 48-inch hood about 400 CFM. The NKBA sets a minimum of 150 CFM for a ducted system. A recirculating hood that does not vent outside provides no real ventilation, so plan the duct route before you buy. That retailer&#8217;s kitchen collection lists under-cabinet, built-in and chimney hoods at 300 to 400 CFM. A chimney hood suits ceilings between 8 and 9 feet, and a telescopic duct is one feature to check for on that type of unit. Good ventilation is part of a sound kitchen design, not an afterthought. Ventilation matters most during high-heat cooking because windows in Quebec homes are generally kept closed in winter.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Health Canada advises cooking on the back burners and running the hood, preferably on high. The high setting lowers humidity and can reduce particles and gases by more than 80 per cent compared with lower fan speeds. Boiling raises humidity considerably, so using a lid and running the hood on high are important in a small, closed kitchen. In a plex with a long galley, the hood does much of the work that a window cannot, and it helps keep the air fresh while you cook.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Layer the fixtures<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The NKBA guideline calls for task lighting on every work surface, in addition to general lighting. Light should come from more than one source, and the fixtures should be adjustable. In practice, that means under-cabinet strips over the counters, a ceiling layer for the kitchen, and pendants over an island or breakfast bar. Dome pendants in 9-inch and 20-inch sizes, available in the same collection, suit different island lengths. Use a smaller diameter over a narrow bench and a larger one over a wide island. Keep the bottom of each pendant at a comfortable height for the people who sit beneath it, and dim everything on one circuit if you can, so the kitchen softens in the evening. Layered fixtures help a kitchen feel warm and useful at the same time, and they are one of the simplest ideas to add in a renovation.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Plan the order and the timeline<\/h2>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Measure and plan the layout.<\/strong> Record the exact wall, window, door and duct positions. Check the work aisle, the three work-centre distances and the landing areas on each side of the sink. The NKBA suggests at least 24 inches on one side and 18 inches on the other.<\/li>\n\n\n\n<li><strong>Check permits.<\/strong> In Montreal, you do not need a permit to replace cabinets, counters, a sink or a bath, or to change flooring. You do need one if the work affects the foundation or structure, modifies a wall, or increases the floor area. The permit analysis fee is $9.80 per $1,000 of work, with a minimum of $167.40 for an exclusively residential building. Structural work needs plans signed and sealed by an engineer. These rules apply within the City of Montreal, so check with your own municipality if you are elsewhere in Quebec.<\/li>\n\n\n\n<li><strong>Hire licensed trades for electrical work.<\/strong> Electrical installation work requires the appropriate R\u00e9gie du b\u00e2timent du Qu\u00e9bec electrical contractor&#8217;s licence in subclass 16. The Corporation des ma\u00eetres \u00e9lectriciens du Qu\u00e9bec qualifies electrical contractors on the government&#8217;s behalf. Ask to see the licence before work begins.<\/li>\n\n\n\n<li><strong>Plan the plumbing around the building type.<\/strong> In a plex with rental units, the rules differ from those for an owner-occupied single-family house. According to the CMMTQ, an owner of a rental building such as a triplex may perform or subcontract plumbing renovation work without a licence only if the work is estimated at under $20,000. In an owner-occupied single-family house, the owner may replace sinks and faucets themselves. Confirm which category your project falls into before you schedule the plumber.<\/li>\n\n\n\n<li><strong>Demolition.<\/strong> Remove the old cabinets, counters and any wall that the permit allows. Protect the floors and the adjoining rooms, especially in a plex where tenants share the building.<\/li>\n\n\n\n<li><strong>Rough-in.<\/strong> Run the electrical circuits, the plumbing supply and drain lines, and the duct for the hood. Have this stage inspected before you close the walls.<\/li>\n\n\n\n<li><strong>Cabinets and counters.<\/strong> Install the cabinets level and plumb, then template and fit the counters. Measure again after the boxes are in place.<\/li>\n\n\n\n<li><strong>Backsplash, hood and lights.<\/strong> Set the tile, install the hood and the duct, and fit the task and pendant fixtures. Test the hood on high before the final clean.<\/li>\n\n\n\n<li><strong>Final finishes.<\/strong> Fit the sink and faucet, add the hardware, and check every clearance you planned in step one.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">The timeline depends on the building, the permit queue and how much structural work is involved, so plan in phases rather than against a fixed number of weeks. Renovating a kitchen in a bungalow where a wall is being opened up will take longer than renovating a galley kitchen in a plex with new cabinets and a new hood. The most useful approach is to finalize the layout and select the hood and fixtures before anything is ordered. Those three decisions are the hardest to change later, and they shape how the kitchen works every day through a long Quebec winter.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Kitchen renovation ideas in Quebec depend heavily on the building you are working in. A Montreal plex and a suburban bungalow were built around very different assumptions about how families cook, where daylight comes from and where the walls sit. Before you choose a backsplash or a hood, it helps to understand the shell you&#8230;<\/p>\n","protected":false},"author":1,"featured_media":1856,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_kadence_starter_templates_imported_post":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-1855","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-home-improvement"],"_links":{"self":[{"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/posts\/1855","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/comments?post=1855"}],"version-history":[{"count":1,"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/posts\/1855\/revisions"}],"predecessor-version":[{"id":1857,"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/posts\/1855\/revisions\/1857"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/media\/1856"}],"wp:attachment":[{"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/media?parent=1855"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/categories?post=1855"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/opinohome.com\/blog\/wp-json\/wp\/v2\/tags?post=1855"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}